Engine and Propulsion
Volvo Penta D1-13 12.2 Hp Shaft-drive
130S-D LH ratio 2.19:1
Blade kit, 2-blade, 14x9, LH folding propeller.
Spinlock control face and gear selector.
Fuel shut off valves at tank.
Length Hull: 9.2m/30’1”
Water Ballast: 250L
Hull/Deck Construction: Vinyl ester / PVC Core
ISO Category: A-4, B-6 Motor: Volvo Penta D1 - 13
Headsail Area: 25.0m2
Mainsail Area: 34.2m2
Asymmetric Spinnaker: 102.0m2
Code 0 Area: 57.0m2
• Sail area subject to final sail design and rating placement
Hull and Deck Construction
Glass-foam sandwich Vinyl Ester laminate vacuum bagged. Sandwich construction with PVC foam core.
Structural bulkheads in composite glass vinyl ester sandwich with some reinforced unidirectional fibres and then bonded to the hull with structural vinyl ester adhesive and/or selected bonding paste (plexus or spa-bond).
Standard white gelcoat finish.
Male/Female cassette style keel connection. Cast iron fin with moulded composite fairings. Cast Lead bulb with composite fairings.
Twin transom mounted impact-protect kick up system. Fabricated aluminium open backed rudder cassettes with impact fuse. Single GRP composite tiller and Spinlock tiller extension.
Insulated self-draining cool box.
Dedicated tack-able navigation station with galley and gimbaling Jet-boil.
Domestic Sani Potty 960 Series Chemical toilet moulded into structure for safe and secure location – includes privacy section.
Mid ships adjustable lightweight alloy and canvas pipe cots x 2 (port and starboard).
Aft adjustable lightweight alloy and canvas pipe cots x 2 (port and starboard)
Storage under mid ships pipe cots. Port and Starboard light weight PVC fabric storage lockers.
4.1 Interior finish Stipple finish white gel coat. Simplistic but practical racing design.
Nav and Electronics
B and G:
H5000 Pilot (inc Linear Drive pilot ram)
Precision 9 compass
Rudder reference & feedback unit
2 x Graphic Displays (one at each helm)
2 x Pilot Controllers (one at each helm)
Flush fit H3000 speed sensor and DST800 depth sensor
Carbon VHMU (vertical mast head unit - wind sensor) + bracket
Triple 20/20 HV mast displays + bracket
NMEA 2000 cables + Ethernet, connectors & installation
Zeus3S 9" MFD
B&G v60 VHF with DSC & AIS receive + remote handset
Hawk VHF antenna
WiFi 4G router for GoFree function
NAIS 5000 transceiver (includes GPS, antenna splitter)
WR10 Autopilot remote control + base station
2 x Way switchboard
3 x Battery switches (on, off and parallel)
VSR -charging relay
3 x interior Hella LED lights
Magnetic compass with power/light circuit
VDO Fuel gauge and sender
Ener-drive Battery Monitor
1 x 50 ah sealed gel engine battery – Optima Blue Top
1 x 120 ah sealed house battery – Dekka AGM
1 x dc outlet
1 x Hella 2LT 980 650-001 M/Head Tri Light.
Removable shore battery charger.
Purpose designed and pre-made house electrics loom with full schematic plan for easy maintenance.
Rig and Rigging
Selden T800 Intermediate Modulus carbon fibre. CnC Pre Preg wound, load orientated filaments to minimise weight and maximise stiffness.
Deck stepped two-piece tube for ease of transport and storage.
T700 Pre Preg mast head with sheave access and mast head instrument mounts.
Twin aerofoil spreaders with 23’ aft rake Machined alloy spreader bars and tangs.
Machined twin top mast backstay tangs and SK 99 cables with Technora cover.
Selden Carbon Rod vang system
M/Head LED tri-light.
1 x Mast Head Halyard sheave exit.
1 x 2:1 15/16 Code Zero halyard sheave and exit.
1 x 2:1 Main halyard sheave and exit.
1 x External jib halyard hanger, lock, sheave, and exit.
1 x 2:1 GS/SS/J5 sheave and exit.
Lazy jack allocated take offs
Dyform standing rigging.
2 reef carbon boom with 2 spinlock reef jammers.
Boom lazy jack attachments.
Aluminium mast base with halyard organisers.
1 x 2:1 Main Halyard - SK99 8mm Performance Technora
1 x 1:1 Mast Head Halyard – SK78 8mm Performance inTechnora.
1 x 1:1 Jib Halyard – SK99 8mm Performance Technora.
1 x 1:1 Mast Head Tack Line – 78 8mm Performance in Technora.
Jib sheeting control system – Port and Starboard.
SK78 6mm Course tune main sheet
SK78 8mm Performance Technora. Fine tune main sheet
SK78 8mm Performance Technora. Top mast backstay control lines with fine tune
SK78 6/8mm Performance.
2 x Jib Sheets – SK78 8mm Performance Technora
2 x Spin Sheets – SK78 8mm Performance Technora.
2 x reefing control systems – SK78 8mm Performance.
1 x Main traveller system – SK78 6mm Performance.
1 x Vang control – SK78 6mm Performance.
1.6m Carbon Bow Sprit
1 x 1:1 M/Head tack line exit
1 x 15/16 2:1 Code Zero exit
Quick connect removable sprit for travel and smaller marina berth requirements.
Harken high performance racing package
2 x Performa 46.2 STP Self Tailing primary winches.
2 x Performa 46.2 STP Self Tailing cabin top winches
Transom mounted traveller track with course and fine tune end boom sheeting control.
Winch-less course topmast runner control with 16:1 fine tune.
Athwartships jib tracks and car for full inboard and full out board set up.
Cross sheet and multi sheet control to primary and cabin top winches.
Custom carbon bow sprit
1:1 M/Head tack line with Spinlock Jammer
2:1 Tack line Spinlock Jammer
Stanchions and Lifelines. OSR Cat 1 and ISO/CE Category A offshore stainless-steel stanchions and 5mm1 x 19mm stainless wire lifelines.
Stainless-steel Push and Pull-pit.
Centre aft stanchion for required electronic devices.
1 x 63890 Lewmar trapezoid forward hatch
2 x 171020 Lewmar cockpit hatches – Port and Starboard
1 x Lockable main cockpit hatch system
Water Ballast System
1 x Custom water ballast in/out valve operational from cockpit.
2 x 250L water ballast tanks in built.
Transfer plumbing system operational from cockpit.
1 x galley through hull with seacock.
1 x Foot pump for fresh-watersystem.
1 x 40L fresh-watertank soft pack.
1 x Cockpit manual bilge pump Cat 1 compliant
1 x Interior manual bilge pump Cat 1 compliant with full boat roving capabilities
Delivery and Commissioning
Delivery to South Coast UK is include in the price. Other locations by request.
Full support splashes for Upright and 90’ position suitable for transport
Unload boat and rig from truck.
Perform delivery checks.
Fill & fair keel to hull joint. Degrease hull, prep, prime & apply 2 coats of Nautix A4 & flat back to smooth surface.
Rig & deck preparation, stepping and tuning, label clutches. jib stowage bungees.
Launch, 20L diesel, engine pdi, hanging anode.
Name on stern.
Mooring kit : Outils Ocean flat fenders & warps
Anchor kit : Fortress FX-11 anchor, chain & warp
Mainsail cover - plain colour (name is extra by quotation)
Wash & polish topsides, valet boat pre-handover.
Hand over sailing trials & instrument base calibration.
Sail Packages available from North Sails and Technique Voile to suit your campaign requirements and rating system optimization.